OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-168
STATUS Command Displays
STATUS APPL Display
The format of the display for the STATUS APPL command without the DETAIL option
is:
Appl
is the identifier of the APPL object.
State
is the current state of the APPL object.
Logged-on
reports whether an APPL object is logged on or logged off. This field can have the
following values:
LOGGED ON means the APPL object is logged on.
LOGGED OFF means the APPL object is logged off.
The state of an MS APPL is LOGGED ON until the user ends the association or, if
the MS fails in the middle of an association, until the MS changes the state to
LOGGED OFF as part of its recovery processing. The MHS manager process does
not change the logged-on state of an APPL. The Logged-on field does not apply to
GW APPLs, and the value displayed for GW APPLs is always LOGGED OFF.
An example of the display for the STATUS APPL command (where the access type is
GW) without the DETAIL option is:
The format of the display for the STATUS APPL command (where the access type is
GW) with the DETAIL option is:
State
is the current state of the APPL object.
MHS status APPL
Appl State Logged-on
appl-id sumstate logstate
MHS status APPL
Appl State Logged-on
UAGW11 STARTED LOGGED OFF
MHS Detailed status APPL appl-id:
State............. sumstate
Logged-on......... LOGGED OFF