OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-179
STATUS Command Displays
Takeover
is the number of times an unplanned takeover has occurred.
An example of the display for the STATUS MON command without the DETAIL option
is:
The format of the display for the STATUS MON command with the DETAIL option is:
process-name
is the name of the MON process.
State
is the current state of the MHSMGR.
Backup-state
is the current state of the backup.
Takeover-count
is the number of times an unplanned takeover has occurred.
Trace-status
indicates whether tracing is enabled (ON) or disabled (OFF).
Trace-sel-options
indicates the trace options currently selected. The trace options are displayed in the
same form used as input to the SELECT option for the TRACE command. This
field is blank if tracing is not enabled.
Trace-file
indicates the name of the file to which the trace data is being written. This field is
blank if tracing is not enabled.
MHS status MON
Mon State Bkup-State Takeover
$ZB1 STARTED STARTED 0
MHS Detailed status MON process-name
State............. sumstate
Backup-state...... sumstate
Takeover-count.... integer
TRACE:
Trace-status...... { ON | OFF }
Trace-sel-options. trace-sel-list
Trace-file........ filename