OSI/MHS SCF Reference Manual

OSI/MHS SCF Error Messages
OSI /MHS SCF Reference Manual—424828-001
B-5
MHS E00018
Cause. An ALTER APPL command for the GW access type contains some attributes
that apply only to an MS APPL.
Recovery. Make sure that the APPL object being altered is the correct one. If so, omit
any MS APPL object attributes from the ALTER command, and retry the command.
MHS E00019
Cause. An attempt was made to add or alter a GATEWAY object using non-unique
process names in the GW-PNAME and GW-AUX-PNAME attributes.
Recovery. Supply unique process names for the GW-PNAME and GW-AUX-PNAME
attributes. The process names must be unique both within a GATEWAY object and
across all GATEWAY objects.
MHS E00020
Cause. An attempt was made to add more than one GATEWAY object that had a
GW-TYPE attribute of P1-EXIT.
Recovery. Only one GATEWAY object of this type is permitted.
MHS W00021
Cause. An attempt was made to specify identical primary and backup CPU numbers in
an ADD or ALTER GROUP command.
Recovery. This is simply a warning message. The group will operate normally but
cannot recover in the event of a CPU failure. If necessary, specify primary and backup
CPU numbers that differ.
MHS E00022
Cause. The SET-RTVL-DEFAULTS attribute for an access-type MS APPL object is set
to OFF, and an attempt was made to alter the APPL object to set to OFF a retrieval
attribute that belongs to the set of list-and-fetch-attribute defaults. When the SET-
RTVL-DEFAULTS is OFF, only a user agent can modify the attribute default sets. This
is required for adherence to the X.400 standards.
MHS E00018 Cannot specify MS APPL attributes when altering
a GW APPL
MHS E00019 Duplicate gateway process names
MHS E00020 Attempt to add multiple P1 gateways
MHS W00021 Non-unique primary/backup CPU numbers
MHS E00022 Cannot alter APPL message retrieval