OSI/MHS SCF Reference Manual

OSI/MHS SCF Error Messages
OSI /MHS SCF Reference Manual—424828-001
B-8
Recovery. Write down the command sequence executed and the specific error message
received, or send the commands and responses to a log. Provide this information to
your Compaq representative.
MHS E00202
Cause. This error occurs when a required attribute is omitted from the command.
Recovery. Retry the command making sure all required attributes are specified.
MHS E00203
Cause. This error occurs when the same attribute is entered twice in one command.
Recovery. Remove the duplicate attribute and reissue the command.
MHS E00204
Cause. This error occurs when the specified process name is illegal.
Recovery. Provide a valid process name and reissue the command.
MHS E00205
Cause. This error occurs when a specified attribute is inconsistent with the class type.
Recovery. Eliminate the illegal attribute and reissue the command.
MHS E00206
Cause. This error occurs when a specified system name is illegal.
Recovery. Provide a valid system name and reissue the command.
MHS E00207
Cause. This error occurs when the class type is something other than GI, LO, MS, MR,
or RS.
MHS E00202 Missing attribute
MHS E00203 Duplicate attribute: attribute-name
MHS E00204 Process name illegal: process-name
MHS E00205 Attribute illegal with this class type: class
MHS E00206 System name illegal: system-name
MHS E00207 Class type illegal: class-type