OSI/MHS SCF Reference Manual

OSI/MHS SCF Error Messages
OSI /MHS SCF Reference Manual—424828-001
B-9
Recovery. Provide a valid class type (GI, LO, MS, MR, or RS) and reissue the
command.
MHS E00208
Cause. This error occurs when the attribute ACCESS-TYPE or ACCESS-NAME is
altered.
Recovery. Reissue the command without the attributes ACCESS-TYPE or ACCESS-
NAME.
MHS E00209
Cause. This error occurs when a nonalterable attribute specification is altered.
Recovery. Reissue the command without the nonalterable attribute specification.
MHS E00212
Cause. This error occurs when the specified MR-NAME and MR-COUNT attribute
values for a group do not match. When you specify an integer in the MR-COUNT
attribute, then the number of times you specify a group name in the MR-NAME attribute
must equal the integer you specify for MR-COUNT.
Recovery. You must either specify MR-COUNT as SYS, or you must specify a number
of MR-NAME attributes that equals the number in MR-COUNT.
MHS E00213
Cause. This error occurs when the VALIDATION attribute value is OFF.
Recovery. Reissue the command, using VALIDATION ON.
MHS E00214
Cause. This error occurs when more than the maximum number of GW-PNAME
attributes have been entered.
MHS E00208 Attribute ACCESS-TYPE or ACCESS-NAME cannot
be altered
MHS E00209 Attribute-spec cannot be altered: attribute-name
MHS E00212 Invalid match of MR-NAME and MR-COUNT attribute
values
MHS E00213 ON is currently the only value accepted for
VALIDATION
MHS E00214 Too many GW-PNAMEs entered