OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-17
ADD APPL Command
The attribute-spec for the ADD APPL command for access type MS is one of the
following attribute name and value combinations. You must specify the
USER-PASSWORD attribute.
SUB-MAX-MSG-LEN
specifies the maximum length of a message that you can submit. This value is in the
range 1 through 10,485,760 bytes (10 megabytes). The default value is 512,000.
USER-PASSWORD
specifies the logon password to be associated with the APPL object. The maximum
length is 62 characters.
Other attribute specifications for the ADD APPL command when the access type is MS
(message store) fall into three categories:
In addition to O/R attributes, the APPL attributes can be divided into the following
categories:
The submission-control attributes are the following attribute name and value
combinations:
SUB-LOWEST-PRI
specifies the lowest priority at which the APPL object can submit messages. This
value is in the range 0 (lowest priority) through 2 (highest priority). The default
value is 0.
[ SUB-MAX-MSG-LEN integer ]
USER-PASSWORD IA5-string
Category Description
Message submission attributes Determine what types of messages the user may submit (for
example, the maximum message length).
Message delivery attributes Define what types of messages can be delivered to this
APPL object (for example, the message content types). An
APPL object that accesses the system through the Transfer
Gateway defines only elements of this category. It only uses
the common message delivery attributes.
Message retrieval attributes Refer only to those APPL objects that access the system
through MS groups. They define the attribute that can be
used for accessing the APPL objects mailbox. APPL
objects of this access type also have all other categories
defined. Operations are limited to the attributes configured
as ON when the message is stored.
[ SUB-LOWEST-PRI integer ]
[ SUB-MSG-ALLOWED { ON | OFF } ]
[ SUB-PROBE-ALLOWED { ON | OFF } ]
[ SUB-RELIABLE-TRANSFER { ON | OFF } ]