OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-29
ADD CLASS Command
ASSOC-CLOSE-TIME
specifies the time allowed for the RT-CLOSE primitive to be completed. This value
is expressed in seconds and has a range of 1 through 36000. The default value is
600.
ASSOC-OPEN-TIME
specifies the time allowed for an RT-OPEN primitive to be completed. This value is
expressed in seconds and has a range of 1 through 36000. The default value is 600.
CHECK-POINT-SIZE
specifies the maximum amount of data in units of K octets that may be sent between
two minor synchronization points by the RTS. This value is in the range 1 through
30. The default value is 1. This attribute is used by OSI/MHS when negotiating the
checkpoint size.
CLEANER-INTERVAL
defines the time interval between store cleaning activity. Store cleaning activity
consists of the Store Cleaner scanning the PDU store and the PDU logs for
completely processed PDUs and then deleting them. The time value is expressed in
minutes. This value is in the range 1 through 1440. The default value is 60.
If CLEANER-INTERVAL is specified, do not specify CLEANER-TIME; otherwise,
an error is returned.
CLEANER-TIME
defines the specific time the store cleaner performs a sweep of the PDU store. The
time value is expressed as local system time in hours and minutes, using 24-hour
clock notation (for example, 14:32 for 2:32 p.m.). There is no default value for this
attribute.
The CLEANER-TIME attribute can be repeated up to a maximum of 12 times.
If CLEANER-TIME is specified, do not specify CLEANER-INTERVAL; otherwise,
an error is returned.
[ RECOVERY-TIME time ]
[ REPORT-ROUTE-RETRY-DELAY time ]
[ REPORT-ROUTE-RETRY-GROW integer ]
[ REPORT-ROUTE-RETRY-TIME time ]
[ ROUTE-RETRY-CHECK { MTS | LOCAL } ]
[ SAFE-STORE-WINDOW integer ]
[ TOTAL-ASSOCS integer ]
[ URGENT-COUNT integer ]
[ URGENT-ROUTE-RETRY-DELAY time ]
[ URGENT-ROUTE-RETRY-GROW integer ]
[ URGENT-ROUTE-RETRY-TIME time ]
[ URGENT-TIME time ]
[ WINDOW-SIZE integer ]