OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-35
ADD CLASS Command
an adjacent MTA before this time expires if the URGENT-COUNT threshold is
reached for the adjacent MTA. This value is expressed in seconds and has a range
of 1 through 36000. The default value is 300.
WINDOW-SIZE
specifies the number of data packets to be sent before an acknowledgment is sent.
This value is in the range 1 through 100. The default value is 3.
The attribute-spec for the ADD CLASS command when the access type is GI is
as follows:
NUMBER-OF-SESSIONS
specifies the maximum number of sessions supported by each GI group. This value
is 0 or 1. The default value is 1.
The attribute-spec for the ADD CLASS command when the access type is MS is
as follows:
NUMBER-OF-MAILBOXES
specifies the number of APPL objects that can access the OSI/MHS subsystem by
way of a single MS group. This value is in the range 1 through 1000. The default
value is 100.
The attribute-spec for the ADD CLASS command when the access type is LO or
RS is as follows:
NUMBER-OF-ASSOCIATIONS
specifies the maximum number of associations (incoming only) supported by each
LO or RS group. This value is in the range 10 through 30. The default value is 20.
Considerations
•
The CLASS object name must be GI, LO, MR, MS, or RS.
•
When you add a CLASS object, it is left in a STOPPED state.
[ NUMBER-OF-SESSIONS integer ]
[ NUMBER-OF-MAILBOXES integer ]
[ NUMBER-OF-ASSOCIATIONS integer ]