OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-59
ADD GROUP Command
The additional attribute-spec for the ADD GROUP command when the class is
MR is one of the following attribute name and value combinations:
MR-NSAP
defines the network service access point (NSAP) part of the OSI address used by this
group for receiving associations from adjacent MTAs. This value identifies a
network layer entity. It is a hexadecimal string with a maximum length of 40
characters, and the string must contain an even number of characters. You must
specify at least two characters.
MR-P-SELECTOR
defines the P-selector part of the OSI address used by this group for receiving
associations from adjacent MTAs. This value identifies a presentation layer entity.
It is a hexadecimal string with a maximum length of 32 characters, and the string
must contain an even number of characters. If you do not use this portion of the
address, it has a length of zero and the string portion is blank-filled.
MR-S-SELECTOR
defines the S-selector part of the OSI address used by this group for receiving
associations from adjacent MTAs. This value identifies a session layer entity. It is a
hexadecimal string with a maximum length of 32 characters, and the string must
contain an even number of characters. If you do not use this portion of the address,
it has a length of zero and the string portion is blank-filled.
MR-T-SELECTOR
defines the T-selector part of the OSI address used by this group for receiving
associations from adjacent MTAs. This value identifies a transport layer entity. It is
a hexadecimal string with a maximum length of 64 characters, and the string must
contain an even number of characters. If you do not use this portion of the address,
it has a length of zero and the string portion is blank-filled.
MR-NSAP hex-character-string
[ MR-P-SELECTOR [ hex-character-string ] ]
[ MR-S-SELECTOR [ hex-character-string ] ]
[ MR-T-SELECTOR [ hex-character-string ] ]
[ MR-TRANSMIT-MODE { DRAIN | NORMAL } ]
[ MRP-BACKUP cpu-number ]
[ MRP-CPU cpu-number ]
MRP-PNAME mhs-proc-name
[ MRP-PRI integer ]
[ RTS-BACKUP cpu-number ]
[ RTS-CPU cpu-number ]
RTS-PNAME mhs-proc-name
[ RTS-PRI integer ]
[ SC-BACKUP cpu-number ]
[ SC-CPU cpu-number ]
SC-PNAME mhs-proc-name
[ SC-PRI integer ]