OSI/TS Configuration and Management Manual

NonStop Kernel File-System Interface
OSI/TS Configuration and Management Manual—424831-001
7-4
Setting and Modifying Subdevice Values
Window information retransmission
timer
WINDOWTIMEOUT
X.25 accept charge X25ACCEPTCHG
X.25 bilateral closed user group X25BCUG
X.25 closed user group X25CUG
X.25 type of closed user group X25CUGTYPE
X.25 destination address X25DESTADDR SETPARAM 1
X.25 parameter negotiation X25NEGOTIATE,
X25NONEGOTIATE
X.25 port address X25PORT
X.25 priority calling X25PRICALL
X.25 PVC channel X25PVC
X.25 network X25REMOTENET
X.25 recognized private operating
agency
X25RPOA
X.25 reverse charge X25REVERSECHG
X.25 throughout class X25THRUPUT
X.25 transit delay X25TRANSITDELAY
Fetch status block SETPARAM 10
Initialize SU parameters to configured
values
SETPMODE 28
Prepare for out-of-sequence completions SETMODE 30
Table 7-2. Setting SERVICE Parameters
SERVICE Parameter SCF Attribute
Procedure
Call
Layer 3 Service (SERVICE
#L3)
ES-IS checksum ESISCHECKSUM
ES-IS enable ESISENABLE
ES-IS configuration reporting
timer
ESISESCONFTIME
ES-IS and system station
group address
ESISESGROUPMACADDR
Table 7-1. Setting Subdevice (SU) Parameters
Subdevice (SU) Parameter SCF Attribute
SETPARAM or
SETMODE
Function