OSI/TS Configuration and Management Manual

NonStop Kernel File-System Interface
OSI/TS Configuration and Management Manual—424831-001
7-41
Response Buffer
The OSI/TS subsystem returns a value in every field of the structure for which
a value is available. All other fields are null.
ZLAN^LOC^SNPA[0:6] LAN local SNPA
ZLAN^RMT^SNPA[0:6] LAN remote SNPA
ZCR^DATA^LEN CR user data length
ZCR^DATA[0:15] CR user data
ZDR^DATA^LEN DR user data length
ZDR^DATA[0:31] DR user data
ZNSP^TYPE NSP type (1=X25AM; 2=TLAM/PAM)
ZNSP^FS^ERRCODE NSP’s FS error
ZNSP^DSM^RETCODE NSP’s DSM return code
ZNSP^DSM^SUBCODE1 NSP’s DSM subcode (This field can contain
information similar to the token code in error
contained in the SPI error response.)
ZNSP^DSM^SUBCODE2 NSP’s DSM subcode (This field can contain
information similar to the offset of the field in error
with an SPI extensible token. This field is extracted
from the SPI error response.)
ZX25DISC^REASON[0:3] X.25 disconnect reason (This field is applicable
only if the NSP type is X25AM. The values are
shown in the X.25 Access Method (X25AM) Manual
and in Appendix B, X.25 Status Code Tablesof this
manual.)
ZX25CLEAR^CAUSE X.25 clear cause (This field is applicable only if
the NSP type is X25AM. The values are shown in
ISO 8208 and in Appendix B, X.25 Status Code Tables
of this manual.)
ZX25DIAGCODE X.25 diagnostic code (This field is applicable only
if the NSP type is X25AM. The values are shown
in ISO 8208 and in Appendix B, X.25 Status Code
Tables of this manual.)
* All fields are integer type fields.
Table 7-9. READ Buffer Status Fields (Page 1 of 2)
Field Description