OSI/TS Configuration and Management Manual

Index
OSI/TS Configuration and Management Manual—424831-001
Index-18
X
accept service parameters 7-31
application manages response 7-27
connection establishment 7-22
negotiation parameters 7-28
OSI/TS manages response 7-26
release connection 7-38
WRITEREAD procedure
accepting connections 7-30
, 7-32
application manages response 6-8, 7-27,
7-30
data transfer completion codes 7-37
general description 7-21
OSI/TS manages response 7-25, 7-26
procedure calls, table of 1-11
releasing connections 7-38
requesting a connection 7-23
requesting connections 7-22
sending data 7-33, 7-35
trace example 4-13
Write-count field 7-35, 7-37
X
X25AM
address components 2-3
address sharing 5-9, 5-11
addressing standards 2-6, 2-7
connection multiplexing 5-12, 5-13
controllers for 1-4
creating subdevices 3-4
defining subdevices 3-3
deleting subdevices 3-5
diagnostic code example 4-26
disconnect reason code example 4-26
installing 3-3, 3-5
multiple lines supported by one TSP,
example 3-32
passive multiplexing 5-14
relationship to OSI/TS 1-5
separate TSP for each line, example 3-
35
standards implemented 1-7
starting 3-7
subsystem performance 3-13, 3-14, 3-
15, 3-16, 3-17
troubleshooting example 4-25, 4-31
troubleshooting strategy 4-22, 4-25
X25DISCONNECTDELAY attribute 3-17
X25NCONMULTIPLEX attribute 3-14, 5-
13
X25PORT attribute 3-13
X25PVC attribute 3-13
X.21 leased connections 1-7
X.25
addressing standards 2-6
, 2-7
circuit disconnection reasons, table
of B-1
clear cause codes, table of B-2
diagnostic field codes, table of B-3, B-9
standards implemented 1-2
X.25 subnetworks
address sharing 5-9
, 5-11
addressing 5-9
connection multiplexing 5-12, 5-13
example command file, generic 3-22, 3-
25
example command file, with SNDCF 3-
25
passive multiplexing 5-14
Z
Zxxx fields 7-40