OSI/TS Configuration and Management Manual

Configuring the OSI/TS Subsystem
OSI/TS Configuration and Management Manual—424831-001
3-21
Starting TSP Processes
TSP^LANEXPANDIOSIZE 4000 4000-32000 Size of the I/O to TLAM
when the I/O is on another
system
TSP^LANREADS 6 3-15 Maximum number of nowait
read I/O
TSP^LANWRITES 3 3-15 Maximum number of nowait
write I/O
TSP^MAXCONNECTIONS Cyclone
CPUs:
1024;
All other
CPUs: 255
Cyclone
CPUs: 1-24;
All other
CPUs: 1-
512
Maximum number of
concurrent transport
connections
TSP^PROTO^ID OFF (na) To enable (if ON) the
inclusion of the Transport
protocol id string
%h03010100 in the CUD
field of outgoing X.25 call
requests.
TSP^RECEIVEDEPTH 1024 96-2047 Maximum number of
$RECEIVE messages to be
queued
TSP^RECEIVESIZE 32000 1024-32000 Maximum size of user
request, in bytes
TSP^SCP^NAME $ZNET (na) Name of alternate SCP
process
TSP^SWAPVOL † (na) Volume from which TSP
allocates extended segment
SERVICE Attributes
TSP^CHECKTSEL 0 0-1 Presence or absence of
responding transport address
in CC-TPDU
TSP^PASSIVE^MUX 1 0-1 Use of shared X25AM SUs
for multiplexing by remote
entity
TSP^SNDCF^1980^ADDR 1 0-1 Use of 1980 addressing mode
in IP/X.25 SNDCF
configurations
* See the MULTILAN/TLAM Management and Operations Manual. For S-series systems, see
the PAM Configuration and Management Manual.
† The default is the volume on which the TSP process code swap file resides.
Table 3-1. PARAM Parameters (continued)