OSI/TS Management Programming Manual

ALTER SERVICE Command
Commands and Responses
5–42 056786 Tandem Computers Incorporated
ZX25PVC
specifies the channel number of the permanent virtual circuit (PVC) with
which the X25AM subdevice to be created is bound. The value of ZX25PVC
must be compatible with the values of the X25AM attributes PVCRANGE and
SVCRANGE. Refer to the X25AM Management Programming Manual for
information about how to set up an X.25 line as a PVC line. The range is 1 to
4095. For TRANSPAC networks, the range is 0 through 4095. The default is
no PVC assigned. To reset this field to its default value, set the first byte to
ZOS4-VAL-PVC-RESET.
ZX25REVERSECHG
specifies whether an outgoing call request asks the recipient to pay the
charges.
ZSPI-VAL-TRUE
indicates that the recipient is requested to pay the charges.
ZSPI-VAL-FALSE
indicates that the recipient is not requested to pay the charges.
ZX25REMOTENET
specifies the addressing conventions to be used when building the called
address in the call request packet. Possible values are:
ZOS4-VAL-X25-NETID-DATAPAC
ZOS4-VAL-X25-NETID-TELENET
ZOS4-VAL-X25-NETID-TRANSPAC
ZOS4-VAL-X25-NETID-TYMNET
ZOS4-VAL-X25-NETID-PSS
ZOS4-VAL-X25-NETID-DATEXP
ZOS4-VAL-X25-NETID-UNINET
ZOS4-VAL-X25-NETID-DATANET
ZOS4-VAL-X25-NETID-DDXP
ZOS4-VAL-X25-NETID-X25NP
ZOS4-VAL-X25-NETID-X25UD
ZOS4-VAL-X25-NETID-X25XA
ZOS4-VAL-X25-NETID-X25SA
The default value of this field is equal to the NETID value of the applicable
X.25 line.
ZX25THRUPUT
specifies specifies the throughput class limit for calls received (data
transmission from the called DTE) and the throughput class limit for calls
initiated (data transmission from the calling DTE). No default value is