OSI/TS Management Programming Manual

ALTER SU Command
Commands and Responses
056786 Tandem Computers Incorporated 5–65
ZREF-TIMEOUT
specifies the time, in units of 0.01 seconds, that the transport entity waits
before reusing any reference or sequence number. Acceptable values range
from 300 (3 seconds) through 18000 (180 seconds).
ZMAX-REXMIT
specifies the number of times unacknowledged transport protocol data units
are retransmitted before shutting down the connection. This parameter is
applicable only to protocol class 4. Acceptable values range from 1 through 8.
ZINACTV-TIMEOUT
specifies the time, in 0.01-second units, that the transport entity waits without
receiving any transport protocol data units, before shutting down the
connection. This parameter is applicable only to protocol class 4. Acceptable
values range from 100 (1 second) through 50000 (500 seconds).
ZWIN-TIMEOUT
specifies the amount of time to wait before retransmitting up-to-date window
information. This parameter is applicable to protocol class 4 only. Acceptable
values range from 100 (1 second) through 25000 (250 seconds).
ZTTR-TIMEOUT
specifies the maximum amount of time to try reassignments after network
connection failures. If the value is 0 seconds, no reassignment is performed.
Only nonzero values are transmitted in the CR-TPDU. This parameter is
applicable for protocol classes 1 and 3 only. Acceptable values range from 0 (0
seconds) through 18000 (180 seconds), with a default value of 9000 (90
seconds).
ZTWR-TIMEOUT
specifies the amount of time to wait for reassignment after network connection
failures. If the value is 0 seconds, no reassignment is performed. Only
nonzero values are transmitted in the CR-TPDU. This parameter is applicable
for protocol classes 1 and 3 only. Acceptable values range from 0 (0 seconds)
through 18000 (180 seconds).
ZCONN-TIMEOUT
specifies the time, in units of 0.01 seconds, that the transport entity waits for a
response to a connect request transport protocol data unit. Acceptable values
range from 300 (3 seconds) through 18000 (180 seconds).
ZDISCONN-TIMEOUT
specifies the time, in units of 0.01 seconds, that the transport entity waits for a
response to a disconnect request transport protocol data unit before releasing