OSI/TS Management Programming Manual

ALTER SU Command
Commands and Responses
056786 Tandem Computers Incorporated 5–67
ZX25RPOA
specifies the Recognized Private Operating Agency (RPOA) transit network(s)
in the facility field of a call-request packet. This attribute is used only for X.25
networks. An RPOA transit network is indicated by the Data Network
Identification Code (DNIC), which is an integer with the range 0 through 9999.
There can be 0 through 7 DNIC's in the X25RPOA integer list.
ZX25RPOA-DNIC-CNT
specifies the number of DNIC's in the ZX25RPOA integer list. The value is an
integer from 0 through 7.
ZX25TRANSIT-DELAY
specifies the transit delay in the facility field of a call-request packet. This
attribute is used only for X.25 networks. The value is in timestamp format
between 0 through 6553 hundredths of a second). The Layer 3 service
ZX25TRANSIT-DELAY value establishes a default value if this attribute is not
given. If the Layer 3 service is also not present, no value is provided.
ZCOM-TKN-CMD-TIMEOUT
is described in the Communications Management Programming Manual. This token is
optional; duplicate occurrences are not allowed.
ZSPI-TKN-RESPONSE-TYPE, ZSPI-TKN-ALLOW-TYPE, and ZSPI-TKN-
COMMENT
are described in the Distributed Systems Management (DSM) Programming Manual.
These tokens are optional and, with the exception of ZSPI-TKN-COMMENT,
duplicate occurrences are not allowed.
ZSPI-TKN-CONTEXT
is used to get the next response message if multiple response messages are
returned, as described in the Distributed Systems Management (DSM) Programming
Manual.
Tokens in Response Buffer
ZSPI-TKN-DATALIST and the final ZSPI-TKN-ENDLIST
enclose a data list, as described in the Distributed Systems Management (DSM)
Programming Manual. These tokens enclose the other response tokens only if the
value of the header token ZSPI-TKN-MAXRESP is nonzero. Multiple data lists can
appear in the response.
ZCOM-TKN-OBJTYPE
specifies the type of object named in ZCOM-TKN-OBJNAME. The token value is
ZCOM-OBJ-SU.