OSI/TS Management Programming Manual

INFO SERVICE Command
Commands and Responses
5–90 056786 Tandem Computers Incorporated
ZOS4-MAP-INFO-SERV-L3 for the Layer 3 service
ZOS4-MAP-INFO-SERV-L4 for the Layer 4 service
ZOS4-MAP-INFO-SERV-L3
is an extensible structured token that contains the current attributes of the
specified Layer 3 service. ZOS4-DDL-INFO-SERV-L3 contains the following
fields:
ZX25ACCEPTCHG
specifies whether an incoming call request that contains a request for the
recipient to pay the charge is accepted. ZSPI-VAL-TRUE means that collect
calls are accepted. ZSPI-VAL-FALSE means that collect calls are not accepted.
ZX25CUG
specifies the closed user group ID (CUG ID) that is sent in every call-request
packet. If no CUG ID is specified, X25AM sends the CUG ID of the associated
X25AM line. Acceptable values range from 0 through 9999.
ZX25DESTADDR
specifies the network address that is used as the called address in an outgoing
call request packet. The address is a string of decimal digits (0-through 9), up
to a maximum of 15 digits.
ZX25NEGOT-L3-WIN, ZX25NEGOT-PKT-SIZE, and ZX25NEGOT-THRUPUT
specify the action to be taken when a call request is received with
unacceptable values for one of these characteristics. If a call request packet
with an unacceptable value for either L3 window, packet size, or throughput
has been received, and that characteristic is defined as negotiable (the
respective parameter has been set to ZSPI-VAL-TRUE), a call accept packet
containing an acceptable value for that characteristic is sent to the network. If
the characteristic is non-negotiable (the respective parameter is set to ZSPI-
VAL-FALSE), the call request is denied.
ZX25PORT
is the logical port number, in X.25 networks, to be used by the subdevice. The
range of values is 0 through 9999.
ZX25PRICALL
is used exclusively by DATAPAC network users and controls the ability to
make priority calls. If set to ZSPI-VAL-TRUE, priority call capability is
enabled; if set to ZSPI-VAL-FALSE, the capability is disabled.