OSI/TS Management Programming Manual

INFO SERVICE Command
Commands and Responses
056786 Tandem Computers Incorporated 5–95
of X.25 virtual circuits in use increases with the number of open network
connections. Therefore, this timer should be kept as short as possible to avoid
resource problems. The waiting time is expressed in hundredths of a second
(0.01 seconds per increment). The values range from 0 (immediate disconnect
request) through 30000 (300 seconds).
ZX25NCON-MULTIPLEX
is the maximum number of outgoing transport connections that can be
multiplexed on a single network connection. The actual decision for
multiplexing a network connection depends on the values of the ZCLASS,
ZNETTYPE, and ZMULTIPLEX attributes for the Layer 4 service object. A
transport connection can be multiplexed if ZCLASS is ZOS4-VAL-CLASS-2,
ZOS4-VAL-CLASS-3 or ZOS4-VAL-CLASS-4 and if two or more subdevices
have ZMULTIPLEX ON and have the same local or remote NSAPs. This
attribute is used only for X.25 networks. The values range from 1 through 512.
ZX25CUG-TYPE
specifies the type of closed user group (CUG) facility. This attribute is used
only for X.25 networks. The possible values are:
Value Meaning
ZOS4-VAL-X25CUG-TYPE-BASIC Basic CUG format
ZOS4-VAL-X25CUG-TYPE-EXT Extended CUG format
ZOS4-VAL-X25CUG-TYPE-BASICOA Basic CUG format with outgoing access
ZOS4-VAL-X25CUG-TYPE-EXTOA Extended CUG format with outgoing access
ZX25BCUG
specifies the bilateral closed user group ID sent in every call-request packet.
This attribute is used only for X.25 networks. The value is an integer from 0
through 9999.
ZX25RPOA
specifies the Recognized Private Operating Agency (RPOA) transit network(s)
in the facility field of a call-request packet. This attribute is used only for X.25
networks. An RPOA transit network is indicated by the Data Network
Identification Code (DNIC), which is an integer with the range 0 through 9999.
There can be 0 through 7 DNIC's in the X25RPOA integer list.
ZX25RPOA-DNIC-CNT
specifies the number of DNIC's in the ZX25RPOA integer list. The value is an
integer from 0 through 7.