OSI/TS Management Programming Manual

INFO SERVICE Command
Commands and Responses
5–96 056786 Tandem Computers Incorporated
ZX25TRANSIT-DELAY
shows the transit delay in the facility field of a call-request packet. This
attribute is used only for X.25 networks. The value is in timestamp format
between 0 through 6553 (hundredths of a second).
ZESIS-HOLD-TIME
specifies the interval at which the protocol keeps its configuration information.
This attribute is valid only when ZESISENABLE is ON. The value is in a
timestamp format from 100 to 65500 (hundredths of a second).
ZIP-X25SNDCF-1980-ADDR
specifies whether 1980 addressing will be used when using SNDCF. The
possible values are:
ZSPI-VAL-TRUE
ZSPI-VAL-FALSE
ZSPI-VAL-TRUE specifies 1980 addressing ; ZSPI-VAL-FALSE, specifies 1984
addressing. This attribute is used only for X.25 networks.
ZOS4-MAP-INFO-SERV-L4
is an extensible structured token that contains the current attributes of the
specified Layer 4 service. ZOS4-DDL-INFO-SERV-L4 contains the following
fields:
ZSEND-SECUR
specifies the content of the protection field for CR-TPDUs and CC-TPDUs. If
you do not provide a value, the protection field is omitted. Note that not all
transport protocol implementations support this attribute. This parameter
applies to transport classes 1, 2, 3, and 4 only. This value is an ASCII string up
to 16 characters long.
ZRECV-SECUR
specifies whether security checking is performed on incoming CR-TPDUs. If
security checking is specified, only incoming CR-TPDUs that have matching
characters in the protection field are accepted. If you do not provide a value,
no security checking is performed. This attribute is valid only when ZCLASS
is ZOS4-VAL-CLASS-1, ZOS4-VAL-CLASS-2, ZOS4-VAL-CLASS-3, or ZOS4-
VAL-CLASS-4. Note that not all transport protocol implementations support
this attribute. This value is an ASCII string up to 16 characters long.
ZTCON-PRI
specifies the priority of the transport connection. This attribute is used to
reassign transport connections after errors have occurred. Because an
agreement has not yet been reached among the implementors concerning this