OSI/TS Management Programming Manual

INFO SU Command
Commands and Responses
056786 Tandem Computers Incorporated 5–107
The remaining 12 digits are the media access control (MAC) address. The
MAC address specifies the local LAN station address.
ZLAN-RMT-SNPA
shows the remote LAN subnetwork address. This address is a hexadecimal
string (0-9 and A-F) up to 14 digits long and is made up of two components.
The first two hexadecimal digits are the link-level service access point selector
(LSAP selector or LSEL); for OSI/TS, this value must be “FE.” The remaining
12 digits are the media access control (MAC) address. The MAC address
specifies the local LAN station address.
ZX25ACCEPTCHG
shows whether an incoming call request that contains a request for the
recipient to pay the charge is accepted. ZSPI-VAL-TRUE means that collect
calls are accepted. ZSPI-VAL-FALSE means that collect calls are not accepted.
ZX25CUG
shows the closed user group ID (CUG ID) that is sent in every call-request
packet. If no CUG ID is specified, X25AM sends the CUG ID of the associated
X25AM line. Acceptable values range from 0 through 9999.
ZX25DESTADDR
shows the network address that is used as the called address in an outgoing
call request packet. The address is a string of decimal digits (0 through 9), up
to a maximum of 15 digits.
ZX25NEGOT-L3-WIN, ZX25NEGOT-PKT-SIZE, and ZX25NEGOT-THRUPUT
shows the action to be taken when a call request is received with unacceptable
values for one of these characteristics. If a call request packet with an
unacceptable value for either L3 window, packet size, or throughput has been
received, and that characteristic is defined as negotiable (the respective
parameter has been set to ZSPI-VAL-TRUE), a call accept packet containing an
acceptable value for that characteristic is sent to the network. If the
characteristic is non-negotiable (the respective parameter is set to ZSPI-VAL-
FALSE), the call request is denied.
ZX25PORT
shows the logical port number, in X.25 networks, used by the subdevice. The
range of values is 0 through 9999.
ZX25PRICALL
is used exclusively by DATAPAC network users and controls the ability to
make priority calls. If set to ZSPI-VAL-TRUE, priority call capability is
enabled; if set to ZSPI-VAL-FALSE, the capability is disabled.