OSI/TS Management Programming Manual

INFO SU Command
Commands and Responses
056786 Tandem Computers Incorporated 5–113
ZIP-NULL-LAYER
shows the generation of the header for the inactive subset (the null network
layer) of the OSI internet protocol (IP). If set to ZSPI-VAL-TRUE, the header is
enabled; if set to ZSPI-VAL-FALSE, the header is disabled.
ZIP-X25-SNDCF
shows whether the subnetwork conversion function (SNDCF) is to be used.
This attribute is used only for X.25 networks. If set to ZSPI-VAL-TRUE,
SNDCF is enabled; if set to ZSPI-VAL-FALSE, SNDCF is disabled. The default
value is ZSPI-VAL-FALSE.
ZX25CUG-TYPE
shows the type of closed user group (CUG) facility. This attribute is used only
for X.25 networks. The possible values are:
Value Meaning
ZOS4-VAL-X25CUG-TYPE-BASIC Basic CUG format
ZOS4-VAL-X25CUG-TYPE-EXT Extended CUG format
ZOS4-VAL-X25CUG-TYPE-BASICOA Basic CUG format with outgoing access
ZOS4-VAL-X25CUG-TYPE-EXTOA Extended CUG format with outgoing access
ZX25BCUG
shows the bilateral closed user group ID sent in every call-request packet.
This attribute is used only for X.25 networks. The value is an integer from 0
through 9999. No default value is provided. If you do not provide a value,
the value of the BCUG attribute in X25AM is used.
ZX25RPOA
shows the Recognized Private Operating Agency (RPOA) transit network(s) in
the facility field of a call-request packet. This attribute is used only for X.25
networks. An RPOA transit network is indicated by the Data Network
Identification Code (DNIC), which is an integer with the range 0 through 9999.
There can be 0 through 7 DNIC's in the X25RPOA integer list.
ZX25RPOA-DNIC-CNT
shows the number of DNIC's in the ZX25RPOA integer list. The value is an
integer from 0 through 7.
ZX25TRANSIT-DELAY
specifies the transit delay in the facility field of a call-request packet. This
attribute is used only for X.25 networks. The value is in timestamp format
between 0 through 6553 (hundredths of a second).