OSI/TS Management Programming Manual

RESETSTATS SERVICE Command
Commands and Responses
5–148 056786 Tandem Computers Incorporated
ZL4-TIMEOUT-THLD
is the threshold value that the Transport Layer compares to the counter ZL4-
TIMEOUT. An L4-THLD event is generated whenever the counter value is
nonzero and dividing the counter value by the threshold value leaves a
remainder of zero. If the threshold is zero, events are never generated.
Acceptable values range from 0 through 65535, with a default of 0.
ZSPI-TKN-RETCODE
indicates whether or not the command was successful. If the command failed, this
token supplies the reason for the failure. Its use is described further in the
Distributed Systems Management (DSM) Programming Manual.
ZSPI-TKN-ERRLIST and ZSPI-TKN-ENDLIST
enclose a standard SPI error list, as described in the Distributed Systems
Management (DSM) Programming Manual.
ZSPI-TKN-CONTEXT
used in returning multiple response messages, is described in the Distributed
Systems Management (DSM) Programming Manual.
Operational Note
The RESETSTATS command updates the reset timestamp counters after the response
is sent.