OSI/TS Management Programming Manual

STATISTICS SERVICE Command
Commands and Responses
5–172 056786 Tandem Computers Incorporated
ZOPEN-CONN
is the number of currently open transport connections. This number is
modified every time a transport connection is established or released.
ZWIN-TIMEOUT
is the time, in 0.01-second units, that the transport entity waits before
retransmission of up-to-date window information. This parameter is
applicable only to protocol class 4.
ZLOC-REXMIT-TIME
is the time, in 0.01-second units, that the transport entity waits before
retransmission of unacknowledged transport protocol data units. This
parameter is applicable only to protocol class 4.
ZMAX-REXMIT
is the maximum number of retries OSI/TS makes to retransmit transport
protocol data units before declaring the transport connection broken.
ZINACTVITY-TIME
specifies the time, in units of 0.01 seconds, that the transport entity waits
without receiving any transport protocol data units before shutting down the
connection. This parameter is applicable to protocol class 4 only. Acceptable
values range from 100 (1 second) through 50000 (500 seconds), with a default
value of 3000 (30 seconds).
ZMAX-EVER-CONN
is the maximum number of transport connections ever counted.
ZINBOUND-CR-CONG-THLD
is the threshold value that the Transport Layer compares to the counter
ZINBOUND-CR-CONG. An L4-THLD event is generated whenever the
counter value is nonzero dividing the counter value by the threshold value
leaves a remainder of zero. If the threshold is zero, events are never
generated. Acceptable values range from 0 through 65535, with a default of 0.
ZINBOUND-CR-CONF-ERR-THLD
is the threshold value that the Transport Layer compares to the counter
ZINBOUND-CR-CONF-ERR. An L4-THLD event is generated whenever the
counter value is nonzero dividing the counter value by the threshold value
leaves a remainder of zero. If the threshold is zero, events are never
generated. Acceptable values range from 0 through 65535, with a default of 0.