OSI/TS Management Programming Manual

STATUS PROCESS Command
Commands and Responses
056786 Tandem Computers Incorporated 5–181
ZCOM-TKN-OBJSTATE
is described in the Communications Management Programming Manual.
ZOS4-MAP-STATUS-PROC-TSP
is an extensible structured token that contains the current status information for
the specified process. ZOS4-DDL-STATUS-PROC contains the following fields:
ZPPID
contains the PID (CPU and PIN) of the primary TSP process.
ZBPID
contains the PID (CPU and PIN) of the backup TSP process. If there is no
backup process, ZBPID contains zero.
ZSUMSTATE
contains the state of the TSP process. Possible values are all valid process state
identifiers defined in Section 2, Communicating with the OSI/TS Processes.
ZOPENS-ALLOWED
indicates whether the specified process is currently allowing opens to be
successfully completed.
ZOPEN-CNT
is the current number of opens of the specified process.
ZTRACE-MASK
is the current trace bit mask. The value 0 indicates that the tracing function is
not currently active. If the tracing function is active, the following symbolic
names can be used to test for individual bits in the trace mask. Each one
represents the bit number of a particular bit in the trace mask.
ZCOM-VAL-TRACE-OPT-ALL
All options that apply to the specified process
ZOS4-VAL-TRACE-OPT-TSP-L3
Layer 3
ZOS4-VAL-TRACE-OPT-TSP-L4
Layer 4
ZOS4-VAL-TRACE-OPT-TSP-MSG
Requests and replies through $RECEIVE