OSI/TS Management Programming Manual

STATUS SU Command
Commands and Responses
056786 Tandem Computers Incorporated 5–189
ZNSP-SU
shows the name of the network I/O process subdevice created by TSP to
convey transport protocol data units (TPDUs). The name shows either a
network I/O process subdevice currently in use for an active transport
connection or for receiving a connection, or the name is the network I/O
process subdevice last used by the TSP to convey TPDUs over this subdevice.
ZLOC-NSAP
shows the local network service access point.
ZRMT-NSAP
shows the remote network service access point.
ZX25DESTADDR
shows the network address that is being used as the called address in an
outgoing call-request packet.
ZX25PORT
shows the logical port number that is being used by this SU.
ZLAN-LOC-SNPA
shows the local LAN subnetwork address.
ZLAN-RMT-SNPA
shows the remote LAN subnetwork address.
ZX25DISC-REASON
shows the reason for circuit disconnect at the X25AM level. A list of values
can be found in Appendix E.
ZX25CLEAR-CAUSE
shows the clear cause at the X25AM level. These integer values are from table
5 of ISO 8208. A list of values can be found in Appendix E.
ZX25-DIAGCODE
shows the diagnostic code at the X25AM level. These integer values are from
figure 14B of ISO 8208. A list of values can be found in Appendix E.
ZNSP-SUBSYS
Indicates which type of NSP subsystem is being used by this SU, "X25AM" or
"TLAM"