OSI/TS Management Programming Manual

Event-Message Descriptions
Event Messages
6–26 056786 Tandem Computers Incorporated
ZSPI-TKN-ERROR
is the standard SPI error token described in the Distributed Systems
Management (DSM) Programming Manual. It contains the subsystem ID of the
file system in the Z-SSID field and the file-system error number in the
Z-ERROR field.
ZSPI-TKN-PROC-ERR
identifies the file-system procedure on which the error occurred. It has one of
the following values:
ZFIL-VAL-CONTROL
ZFIL-VAL-OPEN
ZFIL-VAL-READ
ZFIL-VAL-SETMODE
ZFIL-VAL-WRITE
ZFIL-VAL-WRITEREAD
ZSPI-TKN-FUNCTION
is a conditional token; it is present only if the value of the token ZSPI-PROC-
ERROR is either ZFIL-VAL-CONTROL or ZFIL-VAL-SETMODE. If present,
ZSPI-TKN-FUNCTION contains the number of the CONTROL operation or
SETMODE function that was called.
ZFIL-TKN-FILENAME
for C-series systems, is the name of the file on which the error occurred.
ZFIL-TKN-XFILENAME
for D-series systems, is the name of the file on which the error occurred.
Probable Cause
OSI/TS reports this event for one of the following reasons:
The OSI/TS subdevice is configured incorrectly.
For a TSP process that is part of an OSI/AS subsystem, the OSIMGR database is
configured incorrectly.
An NSP device error occurred.
An error occurred on $ZNET.
Recommended Action
If the error was caused by a configuration error, reconfigure the subdevice or database.
If the error was caused by an NSP device or $ZNET, check to be sure the object is
running and is in the proper state. Otherwise, contact your Tandem representative.