OSI/TS Management Programming Manual

Event-Message Descriptions
Event Messages
6–36 056786 Tandem Computers Incorporated
ZEMS-TKN-CONSOLE-PRINT
has the value ZSPI-VAL-TRUE, indicating that the EMS compatibility distributor
will route the event message to the designated operator console.
ZEMS-TKN-EVENTNUMBER
is the event number. The value is ZOS4-EVT-L4-THLD (404).
ZEMS-TKN-SUBJECT-MARK
marks the token that follows it in the event message buffer as a subject of the event
message.
ZCOM-TKN-SUBJ-SERV
is the name of the Layer 4 service that is the subject of the message.
ZOS4-TKN-THLD-ID
indicates the specific threshold reached. It can be one of the following values:
ZOS4-VAL-INBOUND-CR-CONGESTION
ZOS4-VAL-INBOUND-CR-CONF-ERR
ZOS4-VAL-INBOUND-CR-PROTO-ERR
ZOS4-VAL-INBOUND-TPDU-ERR
ZOS4-VAL-INBOUND-XSUM-ERR
ZOS4-VAL-OUTBOUND-CR-CONF-ERR
ZOS4-VAL-OUTBOUND-CR-ERR
ZOS4-VAL-OUTBOUND-TPDU-ERR
ZOS4-VAL-L4-TIMEOUT
ZOS4-TKN-THLD-VAL
is the predefined threshold value reached.
ZOS4-TKN-DEST-REF
is the address of the remote reference number of the connection that triggers this
threshold.
ZOS4-TKN-SRC-REF
is the address of the local reference number of the connection that triggers this
threshold.
ZOS4-TKN-CALLING-TSAP
is the TSAP component of the calling address.
ZOS4-TKN-CALLED-TSAP
is the TSAP component of the called address.