OSI/TS Management Programming Manual
ADD SU Command
Commands and Responses
5–24 056786 Tandem Computers Incorporated
If no value is provided for ZX25CUG, ZX25CUG-TYPE will default to ZOS4-
VAL-X25CUG-TYPE-BASIC. If ZX25CUG is 0 to 99, ZX25CUG-TYPE can be
any of the four values, and will default to ZOSI-VAL-X25CUG-TYPE-BASIC.
If ZX25CUG is 100 to 9999, ZX25CUG-TYPE must be ZOS4-VAL-X25CUG-
TYPE-EXT or ZOS4-VAL-X25CUG-TYPE-EXTOA, and will default to ZOS4-
VAL-X25CUG-TYPE-EXT. If you do not provide a value, the value of the
CUGTYPE attribute in X25AM is used.
ZX25BCUG
specifies the bilateral closed user group ID sent in every call-request packet.
This attribute is used only for X.25 networks. The value is an integer from 0
through 9999. No default value is provided. If you do not provide a value,
the value of the BCUG attribute in X25AM is used.
ZX25RPOA
specifies the Recognized Private Operating Agency (RPOA) transit network(s)
in the facility field of a call-request packet. This attribute is used only for X.25
networks. An RPOA transit network is indicated by the Data Network
Identification Code (DNIC), which is an integer with the range 0 through 9999.
There can be 0 through 7 DNIC's in the X25RPOA integer list.
ZX25RPOA-DNIC-CNT
specifies the number of DNIC's in the ZX25RPOA integer list. The value is an
integer from 0 through 7.
ZX25TRANSIT-DELAY
specifies the transit delay in the facility field of a call-request packet. This
attribute is used only for X.25 networks. The value is in timestamp format
between 0 through 6553 hundredths of a second). The Layer 3 service
ZX25TRANSIT-DELAY value establishes a default value if this attribute is not
given. If the Layer 3 service is also not present, no value is provided.
ZCOM-TKN-CMD-TIMEOUT
is described in the Communications Management Programming Manual. This token is
optional; duplicate occurrences are not allowed.
ZSPI-TKN-RESPONSE-TYPE, ZSPI-TKN-ALLOW-TYPE, and ZSPI-TKN-
COMMENT
are described in the Distributed Systems Management (DSM) Programming Manual.
These tokens are optional and, with the exception of ZSPI-TKN-COMMENT,
duplicate occurrences are not allowed.