OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-70
CHECK SU Command
Value: a valid Guardian group-id and user-id in the following format:
nn,nn
Default: No default values are provided.
The format of the display for the CHECK SU command without the detail option is:
ASU: Process name
shows the OSI/AS user process name that is using the particular TAPS SU being
displayed (if OSI/AS is being used).
TSU: Process name
shows the non-TAPS OSI/TS user process name that is using the particular TSP SU
being displayed.
TAP: SU Name
shows the TAPS SU that is using the particular TSP SU being displayed.
TAP: Last Error
shows the file system error code included in the last TAPS response. If there was not
an error, 0 is displayed.
TAP: Error Source
shows the source of the last error that occurred on the selected SU at the TAPS level.
It indicates the service layer within TAPS that generated the error in the previous
column. Possible values are: "ACSE", "L6" or "L5". The field is blank if the TAP:
Last Error field is 0.
OSI/TS Check SU
Level SU/Process Name Last Error State
Error Source
TSU: $myap
TSP: $tsp1.#z000001 0 TCon established
NSP: $x25a.#tsp1345 0 Started/Ready
TSU: \comm.$myap
TSP: \comm.$tsp1.#z000002 0 TCon established
NSP: \comm.$lam1.#tsp1fe 0 Started/Ready
TSU: \comm.$app2
TSP: \tsii.$tsp1.#zzz0001 140 L3 TCon not established
NSP: \tsii.$x25a.#tsp1001 140 X25AM Started/Not Ready
ASU: \comm.$app
TAP: \comm.$tap1.#z000001 -1001 ACSE STA01
TSP: \comm.$tsp1.#z000001 0 TCon not established
NSP: \comm.$x25a.#tsp1011 140 X25AM Started/Not Ready