OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-77
CHECK SU Command
RemoteTSel.... BBBC
LocalNSAP..... A998
RemoteNSAP.... B887
LANRemoteSNPA. 3445
X25DestAddr... X25Port 0
--------------------------------------------------------------------
NSP:
X25AM Line Info
State...... STARTED
LinkState.. Ready
--------------------------------------------------------------------
PAM Status LINE
Primary Backup
Name State CPU PIN CPU PIN Trace
$PAM1 STARTED 0 280 1 280 OFF
“ASU:” information will only be displayed if the OSI/AS product is being used.
Depending on the state of the TSP SU and the error situation, the NSP LINE
information might or might not be available for display. If the information is not
available, the following line will be displayed:
" NSP: Not Available "
If an SU has multiple openers, only the opener that appears in the STATUS SU response
will be displayed in the TSU: or TAP: lines..
OSI/AS Detailed Status SU display
This is the detailed display for the OSI/AS STATUS SU command. The following
descriptions of this display are provided as a convenience to the reader.
State
shows the current state of this SU object.
Opens
shows the current number of opens for this object.