OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-89
INFO SERVICE #L3 Command
INFO SERVICE #L3 Command
The format of the display for the INFO SERVICE #L3 command without the DETAIL
option is:
Name
shows the name of the SERVICE object.
IPX25SNDCF
shows whether the subnetwork dependent convergence facility is used.
IPNullLayer
shows whether null-IP is used.
ESISEnable
shows whether the ES-IS protocol is used.
Detailed Display
The format of the display for the INFO SERVICE #L3 command with the DETAIL
option is:
OSITS Info SERVICE
Name *IPX25SNDCF *IPNullLayer *ESISEnable
$MTS0.#L3 OFF OFF ON
OSITS Detailed Info SERVICE $MTS0.#L3
*ESISEnable........ ON *ESISChecksum...... OFF
*ESISESConfTime.... 0:01:00.000 *ESISESGroupMACAddr 09002B000004
*ESISHoldTime...... 0:01:00.000 *ESISISGroupMACAddr 09002B000005
*ESISNotifyIS...... OFF *ESISQueryRetry.... 3
*ESISQueryTime..... 0:00:01.000
*IPChecksum........ OFF *IPDiscardAddrThld. 0
*IPDiscardCongThld. 0 *IPDiscardGenThld.. 0
*IPDiscardLifeThld. 0 *IPDiscardReasmThld 0
*IPDiscardUnsupThld 0 *IPLifetime........ 0:00:15.000
*IPNullLayer....... OFF *IPX25SNDCF........ OFF
*IPX25SNDCF1980Addr ON
*X25AcceptChg...... OFF *X25BCUG...........
*X25CUG............ *X25CUGType........
*X25DestAddr....... *X25DisconnectDelay 0:00:05.000
*X25NConMultiplex.. 512
*X25Negotiate......
*X25Port........... 0 *X25PriCall........ OFF
*X25PVC............ *X25RemoteNet......
*X25ReverseChg..... OFF
*X25RPOA ..........
*X25Thruput........ *X25TransitDelay...