OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-90
INFO SERVICE #L3 Command
ESISEnable
shows whether the ES-IS protocol is used.
ESISChecksum
shows whether the end system to intermediate system (ES-IS) protocol entity
performs checksum on the outgoing ES-IS protocol data units (ES-IS PDUs).
ESISESConfTime
shows the interval at which the protocol reports its configuration to the subnetwork.
ESISESGroupMACADDR
shows the station group MAC address that all OSI end systems listen to.
ESISHoldTime
shows the interval for which the configuration information sent out by OSI/TS
should be held by the receiver of the information
ESISISGroupMACADDR
shows the station group MAC address that all OSI intermediate systems listen to.
ESISNotifyIS
shows whether the ES-IS protocol reports its configuration when it determines that a
new intermediate system is first available.
ESISQueryRetry
shows the number of times the ES-IS protocol entity retries to obtain the NSAP-
SNPA before giving up.
ESISQueryTime
shows the interval during which the protocol waits for a reply to its query of NSAP-
SNPA mapping before retrying or giving up.
IPChecksum
shows whether checksums are to be generated for outgoing IPDUs.
IPDiscardAddrThld
shows the threshold value that the IP entity compares to the counter
IPDISCARDADDR.
IPDiscardCongThld
shows the threshold value that the IP entity compares to the counter
IPDISCARDCONG.