OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-102
Considerations for the INFO Command
X25Thruput
shows the throughput class limit for calls received and initiated.
X25TransitDelay
shows the transit delay in the facility field of a call-request packet.
Considerations for the INFO Command
The considerations contain information about command use that should be read before
studying the command syntax in too much detail.
All Objects
Since recording of routing-table entries is triggered by connection attempts made on
subdevices, entries can remain there until they age out (if obtained using the ES-IS
protocol) or they can remain there indefinitely (if obtained from local configuration).
An abort to all previously used subdevices should be made before any attempt to alter
NSAPs and SNPAs.
SERVICE Object
•
Wild cards are supported for the INFO SERVICE command.
•
The INFO SERVICE command can only be used with the indirect-process name.
SU Object
•
Wild cards are supported for the INFO SU command.
ROUTE Object
•
Wild cards are supported for the INFO ROUTE command.
Examples of the INFO Command
The examples are designed to show correct ways of specifying command syntax.
PROCESS Object
INFO PROCESS $TP4
INFO PROCESS $TP4, DETAIL
ROUTE Object
INFO ROUTE $TP4.#NSAP.49000308008E000010FE01
INFO ROUTE $TP4.#NSAP.*