OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-112
STATS PROCESS Command
Time List Element Table
is used to manage the time list elements (TLES).
Buffer Pool
is used to store the dynamic I/O control blocks like Request I/O CBS, Network I/O
CBS, Transport I/O CBS, and Transport PDU CBS.
Request I/O Control Blocks
are used to process system and user requests and responses.
Network I/O Control Blocks
are used for I/O to the NSP device.
Transport I/O Control Blocks
are used to represent transport primitives within the TSP process.
Transport PDU Control Blocks
are used to represent TPDUs inside the TSP process.
Network I/O Control Blocks:MaxEver
shows the largest number of network I/O control blocks allocated and being used at
once, since the last RESET. These control blocks are used for I/O to the NSP
device.
If the "InUse" attributes do not return to zero when the TSP process is completely idle, it
may indicate a problem in the TSP process. The exception is the value for Request I/O
control blocks and Network I/O Control Blocks (for LANs) which will never fall below
1. For a known load on the TSP process, if the new "MaxEver" attribute values
continue to rise over time, there may be a problem with the TSP process.