OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-117
STATS SERVICE #L4 Command
InboundCRProtoErrThld
shows the threshold number against which the counter InboundCRProtoErr is
compared.
InboundTPDUProtoErr
is the number of times OSI/TS receives a TPDU (other than CR-TPDU) that can be
associated with a transport connection and is invalid or constitutes a protocol error.
InboundTPDUProtoErrThld
shows the threshold number against which the counter InboundTPDUProtoErr is
compared.
InboundTPDUXsumErr
is the number of times OSI/TS discarded a TPDU due to checksum failure.
InboundTPDUXsumErrThld
shows the threshold number against which the counter InboundTPDUXsumErr is
compared.
L4Timeout
is the number of times OSI/TS exceeded the maximum number of retransmissions in
attempting to send a TPDU.
L4TimeoutThld
shows the threshold number against which the counter L4Timeout is compared.
OutboundCRConfErr
is the number of times OSI/TS receives a DR-TPDU refusing a connection request
due to negotiation failure, duplicate source reference, mismatched references,
reference overflow, refused on the network connection, session entity not attached to
TSAP, or address unknown.
OutboundCRConfErrThld
shows the threshold number against which the counter OutboundCRConfErr is
compared.
OutboundCRErr
is the number of times OSI/TS timed out waiting for a response to a CR-TPDU or
receives a DR-TPDU refusing a connection request due to protocol error, invalid
header or parameter not specified, or reason not specified.