OSI/TS SCF Reference Manual

About This Manual
OSI/TS SCF Reference Manual—424832-001
xiii
Manual Contents
Manual Contents
Table ii, Manual Contents lists the contents of each section and appendix in this manual.
Table ii. Manual Contents
Section or Appendix Contents
Section 1, Introduction This section contains the following information:
A general description of the SCF interface
Section 2, OSI/TS SCF
Commands
This section contains the following information:
A description of the command function and syntax of each SCF
command, together with considerations to be aware of before
using the command and examples of using the command.
Section 3, OSI/TS Trace
Facility
This section contains the following information:
An introduction to the OSI/TS trace facility.
A description of the subsystem-specific PTrace commands.
A sample of each type of trace record display.
Appendix A, OSI/TS SCF
Command Syntax
Summary
An alphabetical list of commands and syntax, for reference.
Appendix B, OSI/TS SCF
Error Messages
This appendix describes two types of SCF error messages that
apply to the OSI/TS subsystem:
Messages with positive error numbers are generated by the
OSI/TS subsystem. Messages that do not have error numbers
are generated during command parsing and are generally self-
explanatory.
Appendix C, Examples of
Command Files
This appendix contains example configuration files.
Appendix D, OSI/TS SCF
Attribute Name Changes
Some attribute names were changed in the C-30 release to
improve product usability. All changes maintain backward
compatability - existing programs or command files will still
work with the original names.
Appendix E, OSI/TS
Command Support
This appendix identifies the SCF commands that can be issued
to the OSI/TS subsystem and the commands that are not
supported.
Appendix F, OSI/TS SCF
Status SU X.25 Values
This appendix contains detailed displays of SCF STATUS SU
X25 values.