OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-127
Examples of the STATUS Command
LocalTSEL
shows either the configured local transport selector used in the outgoing transport
connect request or the actual transport selector used by a remote transport entity in
the received transport connect request.
RemoteTSEL
shows the transport selector of the remote transport entity with which a transport
connection has been established. For a transport connection initiated by a remote
site, this field may have a value that is different from the configured remote
transport selector.
LocalNSAP
shows the local network service access point.
RemoteNSAP
shows the remote network service access point.
LANLocalSNPA
shows the local LAN subnetwork address.
LANRemoteSNPA
shows the remote LAN subnetwork address.
X25DestAddr
shows the network address that is being used as the called address in an outgoing
call-request packet.
X25Port
shows the logical port number that is being used by this SU.
Examples of the STATUS Command
The examples are designed to show correct ways of specifying command syntax.
PROCESS Object
STATUS PROCESS $TP4
STATUS PROCESS $TP4, DETAIL
SU Object
STATUS SU $TP4.#S10Z
STATUS SU $TP4.*
STATUS SU $TSP.#Z000003
STATUS SU $TSP.#Z000003, DETAIL