OSI/TS SCF Reference Manual

OSI/TS Trace Facility
OSI/TS SCF Reference Manual—424832-001
3-27
MSG IO
Obj
shows the object name, in this example, the name of the SU to be added.
FE
shows the file system error returned against this SU. For possible values, see the
System Procedure Errors and Messages Manual.
SU
shows the SU name. #ZSPI is the internal TSP SU name used to support the DSM
interface.
File
shows the file number of the opener. The opener of the #ZSPI SU is usually the
SCP process, $ZNET. The file number identifies the file number of the SCP process
used to communicate with the TSP process.
Cnt
shows the message length.
Tag
shows the receive tag.
<..detail..>
shows DSM command information. The column at the left side shows the name of
the SPI tokens or fields within a data structure. See the OSI/TS Management
Programming Manual for parameter descriptions.
With DETAIL ON, in order for the display to be complete, the trace record size must be
large enough to contain the entire DSM command buffer.
MSG IO
This trace record is generated when the TSP process receives a WRITE (or WRITEX )
request from an application. The request is for sending normal or expedited data.
Operation
shows the operation performed, in this example, a WRITE request.
Tag
shows the message tag associated with the request message.
17:33:31.130 >015.710 #80 Msg IO
WRITE Req Tag: 2 File: 1 Syncid: 2 Wrlen: 6 Rdlen: 0 SU: #ZA
P1: 0 P2: 25697 P3: 29793