OSI/TS SCF Reference Manual

OSI/TS SCF Command Syntax Summary
OSI/TS SCF Reference Manual—424832-001
A-7
ALTER SERVICE #L4 Command
ALTER SERVICE #L4 Command
An attribute-spec for the ALTER SERVICE #L4 command is one of the following
attribute name and value combinations:
CHECK Command
Use the CHECK command after experiencing problems with a connection (or a
connection attempt) to obtain more detailed error information about connection
problems (the SU must be static if the connection is not available).
The object-spec is:
[ ALTCLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CHECKSUM { ON | OFF } ]
[ CHECKTSEL { ON | OFF } ]
[ CLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CONNECTTIMEOUT time ]
[ DISCONNECTTIMEOUT time ]
[ EXPEDITED { ON | OFF } ]
[ EXTENDEDFORMAT { ON | OFF } ]
[ INACTIVETIMEOUT time ]
[ INBOUNDCRCONFERRTHLD number ]
[ INBOUNDCRCONGESTIONTHLD number ]
[ INBOUNDCRPROTOERRTHLD number ]
[ INBOUNDTPDUPROTOERRTHLD number ]
[ INBOUNDTPDUXSUMERRTHLD number ]
[ L4TIMEOUTTHLD number ]
[ L4WINDOW integer ]
[ MAXREXMIT integer ]
[ MULTIPLEX { ON | OFF } ]
[ NETTYPE { A | B | C } ]
[ OUTBOUNDCRCONFERRTHLD number ]
[ OUTBOUNDCRERRTHLD number ]
[ OUTBOUNDTPDUPROTOERRTHLD number ]
[ PASSIVEMUX { ON | OFF } ]
[ RECVSECURITY { “text” | RESET } ]
[ REFTIMEOUT time ]
[ REXMITTIMEOUT time ]
[ SENDSECURITY { “text” | RESET } ]
[ TCONPRI integer ]
[ TPDUSIZE
{ 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 } ]
[ TTRTIMEOUT time ]
[ TWRTIMEOUT time ]
[ WINDOWTIMEOUT time ]
CHECK [ /OUT file-spec/ ] [ object-spec ]
[ , select-spec ] ... [ , DETAIL ]
object-type object-name
SU su-name