OSI/TS SCF Reference Manual

OSI/TS SCF Reference Manual—424832-001
B-1
B
OSI/TS SCF Error Messages
This appendix describes two types of SCF error messages that apply to the OSI/TS
subsystem. Messages with positive error numbers are generated by the OSI/TS
subsystem. Messages without error numbers are generated during command parsing and
are generally self explanatory. In a few cases, however, additional information needs to
be provided. These cases are documented in this appendix.
Note
The SCF OSI/TS online help only documents errors with positive numbers. To see the cause
and recovery information, issue the SCF command DETAIL ERROR ON command.
The cause and recovery information for errors without numbers is not available online when
using the SCF DETAIL ERROR ON command.
Error Messages With Positive Numbers
Messages with positive error numbers are generated by the OSI/TS subsystem.
OSI/TS Error 00004
Cause. The value entered is not valid for the attribute of the specified object-name.
Recovery. Check the attribute for a valid value and reissue the command with a valid
value.
OSI/TS Error 00005
Cause. The same select-option has been entered twice in the TRACE command.
Recovery. Remove the duplicate select-option and reissue the command.
OSI/TS Error 00006
Cause. The same modifier has been entered twice in the TRACE command.
Recovery. Remove the duplicate modifier and reissue the command.
OSI/TS 00004 Invalid value for attribute-name for object-name
OSI/TS 00005
Attribute attribute-name already defined for object-name
OSI/TS 00006 Duplicated modifier: modifier-name