OSI/TS SCF Reference Manual

OSI/TS SCF Status SU X.25 Values
OSI/TS SCF Reference Manual—424832-001
F-2
X25ClearCause
•
NOTE 1: Used when the Diagnostic Code Field is coded in accordance with Figure
14-B [in ISO 8208].
•
NOTE 2: Used when the Diagnostic Code Field is not coded in accordance with
Figure 14-B [in ISO 8208].
•
NOTE 3: These clearing causes apply only to a DTE/DCE environment.
•
NOTE 4: The bit indicated as “X” set to 0 indicates a clearing cause generated by a
public data network and set to 1 indicates a clearing cause generated by a private
network.
•
NOTE 5: May be received only if the corresponding optional user facility is used.
•
NOTE 6: Used in conjunction with maritime mobile service.
Table F-1. X25 ClearCause
Clear Cause
Bits
8 7 6 5 4 3 2 1 Notes
DTE Originated 0 0 0 0 0 0 0 0 1
DTE Originated 1 0 0 0 0 0 0 0 2
Number Busy X 0 0 0 0 0 0 1 3, 4
Out Of Order X 0 0 0 1 0 0 1 3, 4
Remote Procedure Error X 0 0 1 0 0 0 1 3, 4
Reverse Charging
Acceptance Not
Subscribed
X 0 0 1 1 0 0 1 3, 4, 5
Incompatible
Destination
X 0 1 0 0 0 0 1 3, 4
Fast Select Acceptance
Not Subscribed
X 0 1 0 1 0 0 1 3, 4, 5
Ship Absent X 0 1 1 1 0 0 1 3, 4, 6
Invalid Facility Request X 0 0 0 0 0 1 1 3, 4
Access Barred X 0 0 0 1 0 1 1 3, 4
Local Procedure Error X 0 0 1 0 0 1 1 3, 4
Network Congestion X 0 0 0 0 1 0 1 3, 4
Not Obtainable X 0 0 0 1 1 0 1 3, 4
RPOA Out Of Order X 0 0 1 0 1 0 1 3, 4, 5
Gateway-detected
Procedure Error
1 1 0 0 0 0 0 1 3
Gateway Congestion 1 1 0 0 0 0 1 1 3