OSI/TS SCF Reference Manual

OSI/TS SCF Status SU X.25 Values
OSI/TS SCF Reference Manual—424832-001
F-12
X25DisconReason
X25DisconReason
Table F-3 is taken from Table 4-12, “Reasons for Circuit Disconnection,” from the X.25
Access Method (X25AM) Manual.
reset - user
resynchronization
11111010 250 Re
.......
11111111 255
Table F-9. X25DisconReason Values
This Word
...
With This
Value ... Indicates This Reason for Circuit Disconnection ...
Integer <0> 0 Never connected.
1 Still connected or connecting.
2 CONTROL 12 issued.
3 Subdevice file closed.
4 Processor down.
5 Subdevice aborted with SCF or CMI.
6 Subdevice stopped with SCF or CMI.
7 Clear request issued.
8 Clear request received.
9 Incoming data packet > PACKETSIZE.
10 Incoming packet invalid for circuit state.
11 Restart Request issued.
12 Inconsistent internal data structure.
13 Incoming Call Request packet had invalid data or
L3WINDOW holding buffers could not be allocated.
14 Level-2 problem.
Table F-8. X25 DiagCode Values: Disconnection
Diagnostic
Bits
87654321
Decimal
Value
Applicable
Packets
(Note 1)