OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-6
PROCESS Object
PROCESS Object
The PROCESS object identifies a specific TSP process within an OSI/TS subsystem.
The object-name for the PROCESS object is tsp-process-name, and it has the following
format:
$process-name
$process-name
is the name of the TSP process as follows:
Local TSP process names can be up to 6 characters (the $ sign followed by 5
characters). For example:
$TSP15
$TSP10
Remote (on another node in an Expand network) TSP process names can be up to 5
characters (the $ sign followed by 4 characters). For example:
$TSP1
$TSP5
If two or more TSP processes share the same X25AM line, the first 4 characters
after the $ sign are used by the TSP process to build the SU name and must be
unique. For example, the following three local TSP processes share the same
X25AM line:
$TSP10
$TSP20
$TSP30
Wild card Support
Wild cards are not supported for the PROCESS object.
Examples
The following are valid object-names for the PROCESS object:
$TSP1
$TSP2
Process States
A TSP process can be in one of the following states: