OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-13
ABORT Command
Examples
The following are valid object-names for the SU object:
$TP4.#S10
TP4.*
ABORT Command
Use the ABORT command to terminate the operation of objects as quickly as possible—
only enough processing is done to ensure the security of the OSI/TS subsystem. Upon
successful completion of the ABORT SU command, SU objects are left in the
STOPPED state. Upon successful completion of the ABORT PROCESS command,
PROCESS objects are deleted.
This is a sensitive command.
The object-spec is:
Considerations for the ABORT Command
The considerations contain information about command use that should be read before
studying the command syntax in too much detail.
PROCESS Object
To allow a TSP process to complete the cleanup of network subdevices (SUs) created by
the process, all SUs subordinate to a TSP process should be aborted before the process is
aborted.
Examples of the ABORT Command
The examples are designed to show correct ways of specifying command syntax.
PROCESS Object
ABORT PROCESS $TP4
SU Object
ABORT SU $TP4.*
ABORT SU $TP4.#SU10
ABORT [ /OUT file-spec/ ] [ object-spec ]
object-type object-name
PROCESS tsp-process-name
SU su-name