OSI/TS SCF Reference Manual

OSI/TS SCF Commands

OSI/TS SCF Reference Manual—424832-001

2-14

ACTIVATE Command

Use the ACTIVATE command to return a suspended TSP process to the STARTED

state. Once the process is in the STARTED state, new transport connections can be

established.

This is a sensitive command.

The object-spec is:

Considerations for the ACTIVATE Command

The considerations contain information about command use that should be read before

studying the command syntax in too much detail.

PROCESS Object

Use the ACTIVATE PROCESS command for TSP processes only. For NSP processes,

refer to the SCF Reference Manual for Multilan/TLAM (for D-series, or PAM

Configuration and Management Manual, for G06 and above releases) and the SCF

Reference Manual for X25AM.

Examples of the ACTIVATE Command

The examples are designed to show correct ways of specifying command syntax.

PROCESS Object

ACTIVATE PROCESS $TP4

ADD Command

Use the ADD command to define a subdevice (SU) of a TSP process to the OSI/TS

subsystem.

This is a sensitive command.

ACTIVATE [ /OUT file-spec/ ] [ object-spec ]

object-type object-name

PROCESS tsp-process-name

ADD [ /OUT file-spec/ ] [ object-spec ]

[ , LIKE object-name ]

{ , attribute-spec [ , attribute-spec ] ... }