OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-16
ADD SU Command
ALTCLASS
specifies the protocol class to be used as an alternative to the preferred protocol
class. See the considerations for the ADD command for a discussion of the
relationship between the ALTCLASS, CLASS, MULTIPLEX, and NETTYPE
attributes.
Value: 0 | 1 | 2 | 3 | 4
Default: the value of the ALTCLASS attribute in the ALTER SERVICE #L4
command. (The default value of the ALTCLASS attribute in the ALTER SERVICE
#L4 command is “none,” the attribute is not used).
CHECKSUM
specifies whether checksum fields are added to TPDUs. This attribute is valid only
when the transport protocol class is 4.
Value: ON | OFF
Default: the value of the CHECKSUM attribute in the ALTER #L4 SERVICE
command.
[ SENDSECURITY “text” ]
[ TCONPRI integer ]
[ TPDUSIZE
{ 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 } ]
[ TTRTIMEOUT time ]
[ TWRTIMEOUT time ]
[ WINDOWTIMEOUT time ]
[ X25ACCEPTCHG { ON | OFF } ]
[ X25BCUG integer ]
[ X25CUG integer ]
[ X25CUGTYPE { BASIC | EXT | BASICOA | EXTOA } ]
[ X25DESTADDR “address” ]
[ X25NEGOTIATE { value | “(” value [ , value ] ...“)” } ]
[ X25NONEGOTIATE { value | “(” value [ , value ] ...“)” } ]
[ X25PORT integer ]
[ X25PRICALL { ON | OFF } ]
[ X25PVC integer ]
[ X25REMOTENET { DATANET | DATAPAC | DATEXP | DDXP | PSS |
TELENET | TRANSPAC | TYMNET | UNINET |
X25NP | X25SA | X25UD | X25XA } ]
[ X25RPOA { integer | “(” integer [ , integer ] ...“)” } ]
[ X25REVERSECHG { ON | OFF } ]
[ X25THRUPUT “(” integer1 , integer2 “)” ]
[ X25TRANSITDELAY integer ]