OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-17
ADD SU Command
CLASS
specifies the preferred transport protocol class. See the considerations for the ADD
command for a discussion of the relationship between the ALTCLASS, CLASS,
MULTIPLEX, and NETTYPE attributes.
For LAN networks, the transport protocol class must be 4.
For X.25 networks, when IPX25SNDCF is OFF, the transport protocol class can be
0, 1, 2, 3, or 4.
For X.25 networks, when IPX25SNDCF is ON, the transport protocol class must be
4.
Value: 0 | 1 | 2 | 3 | 4
Default: Defaults to the value of the CLASS attribute in the ALTER SERVICE #L4
command.
CONNECTTIMEOUT
specifies the amount of time to wait for responses to CR-TPDUs.
Value: 3.000 through 180.000 (3 through 180 seconds)
Default:120.000 (120 seconds)
DELETETIME
specifies whether to delete a subdevice after the last opener closes it. A value of 0
indicates that the subdevice is deleted immediately after the last opener closes it.
(static) A value of -1 indicates that the subdevice is not deleted (dynamic).
Value: -1 | 0
Default: -1
DISCONNECTTIMEOUT
specifies the amount of time to wait for responses to DR-TPDUs.
Value: 3.000 through 180.000 (3 through 180 seconds)
Default: 120.000 (120 seconds)
EXPEDITED
specifies whether the transport expedited data transfer service is supported. This
attribute is valid only when the transport protocol class is 1, 2, 3, or 4.
Value: ON | OFF
Default: OFF