OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-20
ADD SU Command
SNPA format (“FE+MACaddress”) See the LANLOCALSNPA attribute description
for a full explanation of the SNPA value.
Default: No default value is provided.
LOCALTSEL
defines the local transport service access point selector (TSAP selector or TSEL).
TSP uses this field to build the calling TSAP-ID field of the CR-TPDU. If a value is
not provided, the CR-TPDU does not contain the calling TSAP-ID.
Value: A hexadecimal string (0-9 and A-F) up to 64 digits long. This string should
contain an even number of hexadecimal digits. If an odd number of digits is
provided, a hexadecimal “F” is added to the end, making an even number of digits.
Default: No default value is provided.
MAXREXMIT
specifies the number of times unacknowledged TPDUs are retransmitted. This
attribute is valid only when the transport protocol class is 4.
Value: 1 through 8
Default: 3
MULTIPLEX
specifies whether more than one outgoing transport connection is mapped to one
network connection (ON) or not (OFF). To be able to multiplex, two or more
subdevices must have MULTIPLEX ON and have the same local NSAP and remote
NSAP (for outgoing connection requests). If these conditions are met, the
maximum number of outgoing transport connections that are multiplexed together is
determined by the value of the X25NCONMULTIPLEX attribute (see the ALTER
SERVICE #L3 command). See the considerations for the ADD command for a
discussion of the relationship between the ALTCLASS, CLASS, MULTIPLEX, and
NETTYPE attributes. This attribute is used only for outgoing connections on X.25
networks.
Value: ON | OFF
Default: Defaults to the value of the MULTIPLEX attribute in the ALTER #L4
SERVICE command.
NETTYPE
specifies the quality of the network services. See the considerations for the ADD
command for a discussion of the relationship between the ALTCLASS, CLASS,
MULTIPLEX, and NETTYPE attributes.
Value: A | B | C