OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-33
ALTER PROCESS Command
This is a sensitive command. The LIKE option is supported only for SU objects.
The object-spec is:
ALTER PROCESS Command
An attribute-spec for the ALTER PROCESS command is one of the following attribute
name and value combinations:
LANDFC
specifies the maximum number of Layer 2 frames allowed per incoming I/O.
Value: 0 through 22
Default: 10
LANDFT
specifies the maximum number of seconds to do blocking of incoming Layer 2
frames.
Value: .01 through 1.00 (.01 through 1.00 seconds)
Default: .03 (.03 seconds)
LANDEXPANDIOSIZE
specifies the size of the I/O buffer sent to TLAM when TLAM (for D-series, or
PAM subsystems for G06 and above releases) resides on another node.
Value: 4000 through 32000
ALTER [ /OUT file-spec/ ] [ object-spec ]
{ , attribute-spec [ , attribute-spec ] ... }
object-type object-name
PROCESS tsp-process-name
SERVICE service-name
SU su-name [ , LIKE object-name ]
[ LANDFC integer ]
[ LANDFT integer ]
[ LANEXPANDIOSIZE integer ]
[ LANIOSIZE integer ]
[ LANREADS integer ]
[ LANWRITES integer ]
[ MAXCONNECTIONS integer ]
[ PRIORITY integer ]
[ RECEIVEDEPTH integer ]
[ RECEIVESIZE integer ]