OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-38
ALTER SERVICE #L3 Command
Default: 09002B000005
ESISNOTIFYIS
specifies whether the ES-IS protocol entity reports its configuration when it
determines that a new intermediate system is first available. This attribute is valid
only when ESISENABLE is ON.
Value: ON | OFF
Default: OFF
ESISQUERYRETRY
specifies the number of times the ES-IS protocol entity retries to obtain the NSAP-
SNPA before giving up. This attribute is valid only when ESISENABLE is ON.
Value: 0 through 32767 retries
Default: 3 retries
ESISQUERYTIME
specifies the interval during which the ES-IS protocol waits for a reply to its query
of NSAP-SNPA mapping before retrying or giving up. This attribute is valid only
when ESISENABLE is ON.
Value: 1.000 through 655.350 (1 through 655.350 seconds)
Default: 1.000 (1 second)
IPCHECKSUM
specifies whether checksums are generated for outgoing IPDUs. This attribute is
valid only when IPNULLLAYER is OFF.
Value: ON | OFF
Default: OFF
IPDISCARDADDRTHLD
is the threshold value that the internet protocol (IP) entity compares to the counter
IPDISCARDADDR. IPDISCARDADDR is the number of times the IP discarded
an IPPDU because of an address error. This attribute is valid only when
IPNULLLAYER is OFF.
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for this counter.
Default: 0